Domestic Centrifugal Monoblock Pumps
APPLICATIONS:
Domestic, Irrigation, Agriculture, Farms, Gardens, Industries and Civil applications, etc.
SPECIAL SALIENT FEATURES:
- All
components are manufactured from materials as per Standard
Specifications. They are precisely machined on, "MODERN MACHINES",
including, "CNC MACHINES", to years of reliable operations.
- Monoblocks are designed to withstand wide voltage fluctuations.
- Uni-casting volute chamber is designed to give the best possible hydraulic efficiency.
- Air locking is prevented by center delivery casing.
- Pumpset employs at 200 / 240 Volts, 50 Hz., Capacitor Start and Run, 2850 RPM, Totally Enclosed Fan Cooled motor.
- Better insulating materials are used so that Monoblock can withstand high temperature rise.
- All rotating components are dynamically balanced to ensure long bearing life and vibration free operations.
- High operating efficiency of the Monoblock results onto greater water discharge rate and low power consumption.
- Superior mechanical shaft seal for longer life and effective sealing against water leakage.
- Grease lubricated anti-friction ball bearing are fitted at both ends to withstand radial and axial loads.
- Good suction lift characteristic.
- In single phase motor, centrifugal switch is not required which means less and easy maintenance.
SPECIFICATIONS |
| Power Range |
0.37 kw to 1.5 kw , Single phase, 2pole
0.37 kw to 1.5 kw , Three phase, 2 pole |
| Speed |
2850 / 2880 RPM |
| Version |
A.C.50 Hz., Single phase 200-240 V Permanent Split Capacitor (CSR)
A.C. 50 Hz., Three phase 380- 415 V Direct On Line (DOL) |
| Insulation Class |
A / B |
| Type of Duty |
S1 (continuous) |
MATERIALS OF CONSTRUCTION |
| Pump Casing |
Closed Grain Graded Cast Iron |
| Motor Frame |
Closed Grain Graded Cast Iron / Aluminium |
| Impeller |
Closed Grain Graded Cast Iron |
| Shaft |
Stainless Steel |
| Sealing |
Mechanical Seal |
OPERATING LIMITS |
| Suction Lift |
7 mtrs. |
| Maximum Total Head |
48 mtrs. |
| Flow Rate |
15 LPS |
| Maximum Liquid Temperature |
33 oC |
| Maximun Ambient Temperature |
40 oC |
Nominal Pump sizes
(Suction x Delivery) |
25 x 25 mm. (1" x 1")
40 x 40 mm. (1.5" x 1.5")
50 x 40 mm. (2 " x 1.5")
50 x 50 mm. (2" x 2")
65 x 50 mm. (2.5" x 2") |
WARRANTY:
- All products carry a 12 month's warranty from the date of purchase against manufacturing defects.
- Before
comissioning of pumpset, please go through and follow up the
instructions of our Operator's Instructions Manual Book carefully.
Note:
In view of continuous developments, the informations / descriptions /
specifications / illustrations given are subject to change without
notice.
|
